Electric Motorized Mechanism Stepper Motors/DC Brush Motor Actuators For Prepaid/Lorawan/AMR Water Meters/HVAC DN15-32

The K09 brass ball valve actuator is driven by DC2.5-5V power. It can be used on DN32-50 large diameter mini motorized ball valve. It has low electric consumption: maximal 50 mA at empty run, and about 1100 mA at full load run. The motor is DC5V #500. The electric ball valve actuator is designed for driving mini motorized ball valve. It's widely used for closing or opening small water meter with built-in control shut off valve. The applicable industries are: prepay water meter, ultrasonic water meter, heat meter, HVAC, flow control, etc.

Applications:

-Central heat supply system with radiator of hot water

-Central air conditioner in commercial building, hospital

-HVAC, prepay water meter, ultrasonic water meter, ultrasonic heat meter

-Smart city by IOT technology

Model K09 Technical data
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idling: <50 mA @ 3.6V, 23ºC
3. Current with loading: <1100 mA (motor #500)
4. Torque: >9 NM (2400:1)
5. Open/close time: <50S
6. Velocity reduction ratio: 6000:1 (DN32/40/50mm)
7. Protection: 0

Wiring diagram

Factory overview
-Production facilities

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.